Nexbelt Rewards Points: 500 points ($5 value) when purchased without discounts.
This is version 4.0, and we've made many changes to your favorite EDC belt:
Shipped in a camo travel bag!
Granite black - powder coated textured for better wear resistance
The clasp has 2 set screws to give a more reliable hold than just a clasp alone (a Nexbelt exclusive)
Constructed using stainless steel set screws and not pins like cheap others (patent pending)
Our nylon straps are made from a super-high density microfiber material that is an advanced composite of ultra-fine polyester fibers. This allows the stiffness required for holstering your sidearm if you have CCW permit or just your everyday tools. This ratchet belt makes a great work belt also.
NEW! The tip of the strap now has a leather stitch to prevent from fraying.
My 3rd Nexbelt - the new model solves a lot of prior gripes!
I had 2 of the regular Nexbelts before (Oliver and Newport Snow), and they'd been fantastic. After about 2 years, the leather inside finally started to rip, and I've had to cut too many inches to fit anymore. So I went ahead and got this one - and it solves a LOT of previous issues. The nylon inner isn't going to rip like the old models. The set screws are a very nice touch - one thing I've never quite liked is how the lever system pushes the belt away from the inner part of the buckle (I've always thought it should clamp the other way, and compress the end, but that's just my two cents), and with the set screws I now have a way of really clamping it down. Also, I don't know if this is a difference between the standard line and the EDC line, but there's an extra 2 inches of teeth underneath it, making it easier to adjust if I have a holster or am just wearing the belt without. GREAT product, I'm extremely happy.
Appears to be made of quality, durable material. Nice, professional appearance. Fits well. Using the ratchet release tab, under the buckle, requires some initial practice while wearing the belt in order to do it quickly and easily. I bought it for my wife. I'll get one for me when it's time to replace my current belt.
I am an avid concealed carrier and CHL instuctor. I also work at a local gun store/range where I open carry. I recently bought this belt to try out, and I must admit, I'm extremely impressed. It is stiff enough to handle any amount of gun and accessory weight but not uncomfortable. In fact, it's very comfortable! I have even turned several co-workers and customers on to Nexbelt. Will definitely be buying more! Thanks for making a great product!
I bought this because every day belt was making holes in my shirts. I used to have to pull up my pants every time i stood up when i was carrying. Now thats a thing of the past. I will be ordering more like this in the future.
This belt is AMAZING!! I’ve owned 3 different brands of adjustable belts over the past 2 years and I can tell you this belt is the most comfortable ever! The buckle is hard core construction! No pins on here holding it together but real Allen head screws so you can retighten if needed. The belt is held in with a robust claw and then reinforced with two Allen set screws that come pre set with a drop of locktite on them! Easy to adjust when needed but stays put where you leave it! The ribs are solid so they should last a long time too! I plan on wearing this everyday for a long time! Thank you Nexbelt for making a great product!
I have a hybrid holster with 1.5" belt clips. Would this belt work for me being that it is 1 7/16" or would it be a little narrow for my clips and a bit loose?
Hi Kent - We've had a few customers tell us that is no problem. Thanks
I have a 32" waist. If this belt will fit someone with a waist up to 50", how will it not wrap around me all the way to the back? Please explain.
Hi Charlie - our belts are cut to size. The straps are removable from the clasp of the buckle. Please click on link of the video. https://vimeo.com/146124770 Thanks Tom
What is the smallest waist size this belt will fit? My son would love this belt as he is always having me poke extra holes in his belts to get the sizing just right.
Hi Cassie - if you send your request to my email email@example.com, I can show you a picture of a 2 year old wearing our belt. Or you can go to our instgram account nexbelt and see it. Even though the scaling system stops at the 25" mark, it can go down much further. All you have to do is use a ruler to mark behind it. To make the belt last for your son as he grows older, our suggestion is to cut extra long so the tip of the belt will extend to his hip bone where the other belt loop is. Plan on having him use the last teeth on the red strip away from the tip as the gripping point of the paw on the buckle. This will allow the belt to adjust with his waist as he grows. It will allow at least 6" of growth - which would be a lot years for the average person. And since the face of the strap will look almost brand new... it will still look great after several years.
Is it possible to special order (with increased price if needed) this item in 1.25" width? My previous gunbelt was the Liger in that size and I have my holsters setup in that size as well. I would love for the Nexbelt to be my next belt.
Morning Michael - unfortunately we don't have the strap or the buckle in that width.
I have a 49" pants size will this belt work for me?
Hi Bob - yes it will fit. It actually fits up to a 51 1/2
Do you have a buckle that will pass through a TSA checkpoint?
Hi DMorgan - not one that does not have metal. When I go through the scanner, I just remove the buckle and keep the strap on.
My waist is a 36. If I bought the gun belt that goes all of the way out to 50 inches wouldn't the belt be way to big and look like I wrapping it around. I'm just concerned about all of the extra belt length from 36 to 50. Not sure I asked the question very well. Sorry
Morning Dennis - The belts are cut to size. Click on the link to watch the video. Make sure you use our 20% discount for your first purchase by joining our mailing list. https://vimeo.com/205235149
what is the thickness of the triton belt
It is nearly 3/16" thick
Are the buckles nickel free
Hi Michael - there is a small amount of nickel in the metal.
Re: Titan gun belt: Have you got this style in brown?
Is it possible to get the black gun belt with the pewter colored 3 bar buckle?
Hi Nelson - we do sell the indivdual pieces so you can choose your own designs. I've attached the links for you. If you're a first time buyer - join our email list and get a code for 20% off. https://www.nexbelt.com/collections/straps/men https://www.nexbelt.com/pages/mens-buckles
What brand of tan pants are in the photo with the black edc belt?
Hi John - The North Face.
I’m allergic to nickel in belt buckles does this belt buckle have nickel in it?
Hi Joseph - yes the belts have nickel. But the Titan Black buckle has a powder coated black material that covers the entire buckle so it should not bother you.
What is the width of this belt?
Hi Josh - It is 1 3/8" wide. Easily supports your firearm.
Might be a stupid question but what is the easiest way to cut this down to size? Thanks! :) ~Happy Shooting~
Hi Daniel - good question! Use regular household scissors. You can also use a ruler as a guide and use a utility knife. If the scissors or knife is a little dull, there will be a little bit of fraying but no worries - just lightly run a lighter's flame around the area and it will shrink and seal the nylon. You don't really have to do that because it will encased in the clasp but some people like to do this as a precautionary step.
Can I buy different buckles for the nylon belt?
Hello, Most of our buckles and straps are interchangeable, although not all buckles have the option to upgrade to an EDC clasp which provides the extra hold for security. If you had a specific buckle in mind, you can always call and check with any of our CSR agents to confirm if the buckle of your choice could be upgraded for an EDC clasp.